2026-11-20 · 6 min read · Atlanta
Why Does the Square Footage on My Atlanta Listing Differ From the County Record?
Why does the square footage on my Atlanta listing differ from the county record? Usually the two numbers were measured by different people, at different times, under different rules, and the county figure may never have caught up with a finished basement, an enclosed porch or an addition.
Neither number is automatically wrong. Each one answers a slightly different question, and the useful work is finding out which question each one answered.
This guide is from Andrew and Jassey Nguyen. NRG Nguyen Realty Group is a real estate team with Keller Williams Realty Peachtree Road helping buyers and sellers in metro Atlanta, Georgia make sense of a home's square footage when the listing and the county record disagree.
Where does each number come from?
The county figure is kept by the Board of Tax Assessors in Cobb, Fulton, DeKalb or whichever county the home is in. Its job is to support a tax value, and it is built slowly. MeasureFloorPlan, a floor plan measurement service, notes that assessor records are pieced together from permit records, builder certificates of occupancy, field visits that may be years or decades old, and sometimes estimates.
The listing figure comes from whoever supplied it. It may come from a recent appraisal, the builder's plans, a professional measurement, or the tax record carried straight over. In a house that has changed since it was built, each of those sources can land somewhere different.
Work done without a permit adds another layer. A room can be finished, painted and lived in for years without the county ever learning it exists.
What counts as square footage under the standard appraisers use?
Fannie Mae's published measuring guidelines require appraisers to use the ANSI Z765-2021 standard when they measure a home's living area. Those same guidelines acknowledge that the living area shown in MLS systems and assessor records may not have been measured that way.
Opendoor's guide to the standard describes it as counting finished, above-grade living area, measured from the exterior walls, where the ceiling is at least seven feet high. The ANSI text also requires that above-grade and below-grade finished space be reported separately rather than blended into one total.
The standard describes itself as offered for voluntary application. So a county record, a builder brochure and a listing may each follow it closely, loosely or not at all, and the house stays exactly the same size while the numbers move.
Which parts of an Atlanta house tend to create the gap?
The terrain causes a lot of it. Across East Cobb and the rolling streets around Paper Mill and Sope Creek, homes often step down a hillside into a terrace level with windows and a walkout door. Under ANSI, that level is reported as below-grade space, even when it is finished as well as the rest of the house.
A few other features show up again and again:
- Bonus rooms over garages, where sloped ceilings can drop below the height the standard counts.
- Two-story foyers and great rooms, which tempt people to count floor that is really open air.
- Enclosed porches and sunrooms, which may or may not read as finished living space depending on how they were built.
- Rear additions and attic conversions in older intown Atlanta homes, which may predate the current owner's records.
Fair Assessments, a property tax consulting firm, writes that homes with multiple stories are the most likely to carry incorrect living area in Cobb County records.
What steps help sort out the difference?
A short, ordered pass through the paperwork often explains the gap before anyone measures anything.
- Pull the county record card. Note the square footage and whether it lists a basement separately.
- Gather what you already have. An earlier appraisal, the builder's plans and any permits for later work each tell part of the story.
- Walk the house with fresh eyes. List what changed since it was built, such as a finished lower level, a closed-in porch or an addition.
- Consider a measurement under ANSI. An appraiser or measuring professional can report above-grade and below-grade space separately.
- Decide how the listing will present it. Our team likes to show the figures separately and note where they came from, as part of our selling process.
- Ask the county about a review if its record is off. The Board of Tax Assessors can explain what documents it accepts.
What mistakes do people make when the numbers disagree?
The most common one is treating the larger number as the true one. A bigger figure feels like good news, yet it can fold a basement into the total in a way an appraiser will later pull apart.
Another is measuring room by room with a tape and adding it up. Room-by-room measurements leave out wall thickness, stairs and hallways, so the total rarely matches any official method.
Buyers make their own version of the mistake. Comparing price per square foot across listings only works when the homes were measured the same way, and a house that reports its terrace level separately can look smaller on paper than a neighbor that blends everything together.
The last mistake is assuming the county noticed the renovation. Unless a permit or a visit told the county, the record may still describe the house as it stood years ago.
What might this look like in a hillside East Cobb house?
Say a homeowner owns a two-story house on a sloped lot. The county record shows the main and upper floors as they were built. Over the years, they finished the terrace level and closed in a screened porch off the kitchen.
Their first instinct is to list one large number that adds everything together. Instead, they have the home measured under ANSI. The terrace level is reported as finished below-grade space, and the measurer looks closely at the porch to decide whether its walls, floor and heating make it part of the living area.
The listing then shows above-grade and below-grade figures separately, with a short note on the source. When a buyer opens the county record and sees a smaller figure, the difference has a clear explanation they can follow, and the conversation moves on to the house itself.
Frequently asked questions
Which square footage number is the correct one?
The most reliable figure is usually a recent measurement under the ANSI standard, because it reflects the house as it stands today. The county number is often older and may follow different rules.
Will correcting the county record change my property taxes?
It could, because the record supports the county's assessed value. Your county Board of Tax Assessors or a tax professional can tell you what a change would mean for your home.
Does a finished basement count as square footage?
A finished basement counts as finished space, but the ANSI standard reports it separately from above-grade living area. Showing both figures lets buyers see exactly what they are getting.
Looking at your own numbers
If the figures on your home do not line up, or the homes you are touring seem to be measured in different ways, our team can go through the records with you and help you decide what to check first.
NRG Nguyen Realty Group is a real estate team with Keller Williams Realty Peachtree Road helping buyers and sellers in metro Atlanta, Georgia make sense of a home's square footage when the listing and the county record disagree.
Send us a message: nrgmovesyou.com/contact
Or book a 15-minute discovery call with our team: schedule a call
Andrew and Jassey Nguyen
NRG Nguyen Realty Group
Real Estate Agents in Atlanta, GA
678-743-1586
nrgmovesyou.com
This article is general information, not legal, tax or appraisal advice. For questions about your own home, talk with a licensed appraiser, your county Board of Tax Assessors, or a real estate agent who knows your area.